Select Page

ADHL-POLY-83

ADHL-POLY-83


 

The ADHL-POLY-83 is a two-component (1:1) polyaspartic floor coating system which has a very faint odor. The ADHL-POLY-83 is used as a base coat (colored) and a clear top coat using a common hardener. It provides a quick turnaround with very rapid curing time (tack-free of approx 100-120 minutes) under normal conditions allowing the installation of a flooring system in a single day. The product displays excellent curing capability at very low-temperature levels. This product offers superior mechanical and chemical properties and is low maintenance. It also displays a superior aesthetic finish and excellent UV stability. We recommend the utilization of the Adhesives Lab vinyl chips in combination with ADHL-POLY-83 products. Two- or three-coat systems can be considered (ask an Adhesives Lab representative for additional details).

 

industry application


 

  • Parking garage floors
  • Other residential applications
  • Commercial centers
  • Office buildings
  • Retail stores
  • Manufacturing facilities
  • Food processing and preparation plants
  • Public facilities including hospitals and schools.

Advantages


  • Solvent-free, no/minimal odour
  • Zero VOC, 83% solids
  • Potential for LEED eligibility
  • Excellent UV (non-yellowing) and impact resistance
  • Cures quickly and at low temperature levels
  • Possibility to install base coat and top coat in a single workday
  • High chemical and mechanical resistance
  • Impermeability / low moisture sensitivity
  • Superior gloss finish

 

Consult Technical Information

Industrial & Residential

Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate.

Industrial Flooring

Its exceptionally low odor allows the product to be used in areas where other products cannot be used such as shopping malls, hospitals, restaurants, and etc.

Industrial & Residential

Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate.

Industrial & Residential

Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate.

Industrial & Residential

ADHL-EPOX-100 is versatile and can be applied as a smooth or non-slip coating, depending on the customer’s requirement.

how to install


EPOXY TOP COAT
COLOR BASE 
CONCRETE FLOOR

  STEP 3


5. Optional : You can spread a broadcast of your choice on the surface so that the broadcast stick to the floor. Once the broadcast is on the surface you will need to backroll it to get a uniform finishe and anti-slip.

6. Apply another 8-mil thick layer of ADH SOLID Epoxy over the entire surface in order to properly shield and seal the broadcast between the said layers. Let it dry and you’re done !

  STEP 2


4. Add your COLORPODS to the ADH SOLID and apply a new 20 to 30 mils thick coat on the entire surface of the floor.

  STEP 1


1. Prepare the concrete floor surface by blast tracking the floor with a DIAMOND TEETH BLADE and by opening the cracks with a V-CUT BLADE. This serves to open the pores of the concrete for coats adhesion. Once completed, vaccum all dust, stones and impurities. It is very important that the floor is spotless.

2. Use ADH SOLID at 8 mils thick on the entire floor surface to fill the cracks in the concrete and use as the basecoat. At this stage, it is important to use the product and not a crackfiller because it will not enter the bottom of the cracks as the ADH SOLID does so well.

3. With a crackfiller, fill the cracks to give a flat surface over the entire floor. Once the product is well applied on the whole surface and no cracks appears, wait until the surface dries. If once dry, there is some imperfection, you can sand the necessary areas until satisfaction. To finish this step, do not forget to vaccum the residue caused by sanding.