We strive to always improve our formulas in order to offer key benefits to those who use our products. We understand the basis of a well done project comes from uncompromising product quality.
VS COMPETITOR’S PRODUCTS
Our CASTING resin is crystal clear and you can poor up to 4 inch thickness in adequate temperatures. This product has a Slow cure of up to 72 hours to properly evaporate any trapped air bubbles inside the resin itself. This also causes our resin to not shrink compared to competitors resins when poured very thick. 100% UV resistant, our casting resin is extremely resistant to UV rays.
RESIN’S FROM OUR CHEMIST
Here at Adhesives Lab we strive to provide our installers and distributors with our own product formulas and proven testing to get away from the enormous stigma of “private labels” in our industry.We can also provide in depth testing and color matches for our resins.
SHORE D HARDNESS TEST
We test our resins and products by the standard SHORE D HARDNESS TEST to provide a quality hardness on each product. A resin usually over 80 becomes to brittle and a resin under 70 typically becomes to soft for the standard coatings in our industry.
Our ADHL-EPOX100 CLEAR resin has a new added anti-foaming agent that once the resin installed under 15 MIL thickness, the anti-foaming agent will rise to the surface to eliminate any bubbles in the resin itself before evaporating. We constantly test our resins for “FISH EYES” or also known as “CRATERS” when our resins come in contact with contamination’s such as oil, grease, dirt and etc.Providing our customers with a higher quality product that has a higher resistance to contamination is what we strive to formulate.
OVER 50 DIFFERENT COLORS TO CHOOSE FROM
Choose from a variety of over 50 different colors when it comes to our products and resins. In big quantities we can also do color matches.
DON’T MISS A THING.